Recovery receiver WiFi tutorial

Recovery receiver WiFi tutorial

Recovery receiver WiFi tutorial 

  Note：If you can't find your receiver's wifi or forget your receiver's wifi password, please follow this tutorial to recover it.

 

1.   Make sure the receiver's Bluetooth can be searched

2.   Install and activate Surpad. Surpad is available for new users for one month. If you already have a permanent version of Surpad, please skip this step. Below is the Surpad download link.

https://file.esurvey-gnss.com:9018/s/HAZ7SkX4QrxSwzM

Surpad Activation Tutorial：

Open the Surpad-Project-About software-Software Activation-Online Activation

                              

 

3.   Restore receiver wifi or delete wifi password tutorial

Make sure your receiver is switched on.

Open Software-Device-Communication-Search-Connect-Debug-Common Commands-Factory Reset-Sent

                                                                                                  

 

 

 

     After finishing, you can hear the voice prompt of device self-check. After the device restarts, you can search the WIFI of the device. This operation will delete all Settings, but will not delete the static data files stored in the device

 

 If that doesn't work, try the following

 

1.     Device->device settings, make sure the Wi-Fi is enabled


2.     Check the working mode: If the datalink is “Device Internet”, and “network mode” is “Wi-Fi”, please change the “network mode” to “GPRS” and wait for 1~2 minutes or restart receiver. When using Wi-Fi, receiver will switch to client mode, so you cannot find its hotspot.

 

 

 

 

 

 


                                                                                                   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 





    • Related Articles

    • What if the receiver cannot get fixed?

      Attached the document how to find out the reason causing receiver not getting fixed.

    • How to check your GNSS board firmware information

      How to check your GNSS board firmware information? From main firmware version 0.24.220812, we are no longer showing GNSS board information on the WebUI. If you need to know for which GNSS board and GNSS board firmware version your GNSS receiver is ...