How to upgrade by U disk

How to upgrade by U disk


How to upgrade by U disk

  1.  Prepare the upgrade file

RinoTrack.apk  -----   EAG software must be named as this format

devfrm  ---   Other parts program folder

  1.  Description of devfrm upgrade file list

Description of “devfrm” file details list: (Each program version name must follow the following format)

  1. ECU controller firmware（MC3）：     GeckoSteer_MC3.bin       
  2. ECU controller firmware（MC4）：    GeckoSteer_MC4.srp
  1. ECU controller firmware（MC5）：    AUP_MC5RC.psr
  2. Moter firmware：           EES_E2910.bin
  3. GNSS board firmware：      V28_BRD_FRM.bin (Only for H board)
  4. iMM1 firmware：         iMM1_FRM.bin

3.  U disk upgrade operation

Tips: Restart the device after the upgrade is completed. If you upgrade multiple objects, it is recommended that you upgrade each object separately, and try not to select multiple objects to upgrade at the same time.



    • Related Articles

    • How to update by WebUI

      1、Connect hotspot of MC5，The MC5 hotspot password is unis1234 2、Enter website 192.168.10.1， If the interface displays abnormally, please refresh it several times 3、Click SYSTEM 4、You can select the project you want to upgrade 5、Then select upgrade ...

    • How to export NMEA data through WebUI

      How to export NMEA data through WebUI ——For Unicore board Upgrade MC5 firmware to the newest version Cut off all power supplies and wait for more than ten seconds for the new firmware configuration to complete Log in to the webUI(Password: unis1234), ...

    • How to login MC5 WebUI and set up radio protocol

      How to login MC5 Web UI and Set up Radio Protocol 1. Find and connect MC5’s Wi-Fi. 2. Input password “unis1234”. 3. Input IP address 192.168.10.1 in browser. 4. Click SETTINGS ——> Radio to set up protocol. Note: 1. Currently Frequency setting is not ...

    • How to check your GNSS board firmware information

      How to check your GNSS board firmware information? From main firmware version 0.24.220812, we are no longer showing GNSS board information on the WebUI. If you need to know for which GNSS board and GNSS board firmware version your GNSS receiver is ...

    • How to query frequency signals that are not tracked by the board

      How to query frequency signals that are not tracked by the board Connect the PC to the DB9 connector. Open sscom5.13.1.exe software, select current port, and open the port. 3. Input “mask BDS” and click “send”, remember to check “AddCrLf” button, you ...