How to check your GNSS board firmware information

How to check your GNSS board firmware information

How to check your GNSS board firmware information?


From main firmware version 0.24.220812, we are no longer showing GNSS board information on the WebUI. If you need to know for which GNSS board and GNSS board firmware version your GNSS receiver is using, there are several ways to find out.


1.      Web

Please connect to the receiver's wifi and log on to 192.168.10.1/realtime/, in gps.xml you will find the information of GNSS board of your GNSS receiver including the model and firmware version of the GNSS board.

 



In devinfo.txt, you can find the configurations of your GNSS receiver including GNSS board model, Bluetooth version and antenna type.

2.      Surpad

After you have connected the GNSS receiver with Surpad, in Device -> Communication -> Debug, input command “GET,GPS.INFO.MODEL” and click Send to check the GNSS board model of your GNSS receiver; input command “GET,GPS.INFO.FIRMWARE_VER” and click Send to check the GNSS board firmware version.

    

    

    • Related Articles

    • How to finish GNSS board reset through PC serial tool

      How to finish GNSS board reset through PC serial tool Connect the PC to the DB9 connector. Open sscom5.13.1.exe software, select current port, and open the port Input “unlog” here to close all output statements, remember to check “AddCrLf” button, ...

    • How to query frequency signals that are not tracked by the board

      How to query frequency signals that are not tracked by the board Connect the PC to the DB9 connector. Open sscom5.13.1.exe software, select current port, and open the port. 3. Input “mask BDS” and click “send”, remember to check “AddCrLf” button, you ...

    • How to upgrade by U disk

      How to upgrade by U disk Prepare the upgrade file RinoTrack.apk ----- EAG software must be named as this format devfrm --- Other parts program folder Description of devfrm upgrade file list Description of “devfrm” file details list: (Each program ...

    • What if the receiver cannot get fixed?

      Attached the document how to find out the reason causing receiver not getting fixed.

    • How to export NMEA data through WebUI

      How to export NMEA data through WebUI ——For Unicore board Upgrade MC5 firmware to the newest version Cut off all power supplies and wait for more than ten seconds for the new firmware configuration to complete Log in to the webUI(Password: unis1234), ...