How to update by WebUI

How to update by WebUI


1、Connect hotspot of MC5，The MC5 hotspot password is unis1234




2、Enter  website     192.168.10.1，  If the interface displays abnormally, please refresh it several times



3、Click SYSTEM



4、You can select the project you want to upgrade



5、Then select upgrade file by click Browse




Tips:  The file  named as MC5RCXXXXXXXX   is  MC5 upgrade  package,  the update_20xxxxxxx   is the operation system upgrade package, the EES_xxxxx  is EWheel upgrade package.



    • Related Articles

    • How to export NMEA data through WebUI

      How to export NMEA data through WebUI ——For Unicore board Upgrade MC5 firmware to the newest version Cut off all power supplies and wait for more than ten seconds for the new firmware configuration to complete Log in to the webUI(Password: unis1234), ...

    • How to login MC5 WebUI and set up radio protocol

      How to login MC5 Web UI and Set up Radio Protocol 1. Find and connect MC5’s Wi-Fi. 2. Input password “unis1234”. 3. Input IP address 192.168.10.1 in browser. 4. Click SETTINGS ——> Radio to set up protocol. Note: 1. Currently Frequency setting is not ...

    • How to check your GNSS board firmware information

      How to check your GNSS board firmware information? From main firmware version 0.24.220812, we are no longer showing GNSS board information on the WebUI. If you need to know for which GNSS board and GNSS board firmware version your GNSS receiver is ...