Simulator Operating Instruction

Simulator Operating Instruction


Simulator Operating Instruction

  1. First, set the control mode to Encoder(the original DEMO mode has been deleted, the simulator only supports this mode)

  1. Go to Settings ----> Advanced Settings, select “Emulator Setting”, if turn on or off the emulator function, once the emulator is turned on, the system will still remain demo mode when rebooted. (Password: 1234) 

Caution:

  1. When you turn on or off the emulator, the controller will be initialized automatically, please wait for 20-30 seconds to complete the initialization before doing other operations.
  2. Set the latitude and longitude only when the simulator is open, you need to enter the format as shown in the figure, clicking OK will also restart and wait for 20-30 seconds.
  3. When the speed setting is finished, click the check mark on the keyboard to take effect immediately, no need to wait or click OK.

  1. Do not set single/dual antenna when the simulator is open, if you do it, the system will exit the simulator state.
  2. Current emulator is adapted to various boards, which no longer distinguishes between device types.